Re: EIGRP 0.0.0.0 vs Passive Interface

From: Mounir Mohamed (mounir.mohamed@gmail.com)
Date: Mon Apr 30 2007 - 04:08:36 ART


0.0.0.0 just to enable EIGRP on all interfaces regradless the address class
belong to, passive default do disable hello packet from send out all
interfaces, no passive interface to allow only specific interface to send
and receive hellow packets which result in EI|GRP adjecency through such
interface.

Best Regards,
Mounir Mohamed

On 4/30/07, Jeff Mullan <jmullan78@gmail.com> wrote:
>
> Folks,
> I just lost some points on one of these mock labs on EIGRP. The task
> wanted
> to run EIGRP only on the interface in question. Hence, I did a network "
> a.b.c.d 0.0.0.0". The solution, along with this also had a passive
> interface
> default + no passive interface "this interface". I dont see a reason why
> we
> would need the passive command considering I am using 0.0.0.0. Any
> thoughts
> ?
> Thanks,
> JM
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>

-- 
Best Reagrds,
Mounir Mohamed


This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART