From: Sasa Milic (smilic2@pexim.co.yu)
Date: Sat Apr 28 2007 - 07:27:00 ART
It is relevant only on router that receives the call. That router will wait
until calling router authenticates itself.
Regards,
Sasa
----- Original Message -----
From: "Bit Gossip" <bit.gossip@chello.nl>
To: <ccielab@groupstudy.com>
Sent: Saturday, April 28, 2007 12:04 PM
Subject: catch-22 with ppp chap wait
> Group,
> I don't get this command:
> ppp chap wait
>
> 'To specify that the router will not authenticate to a peer requesting
> Challenge Handshake Authentication Protocol (CHAP) authentication until
> after
> the peer has authenticated itself to the router, use the ppp chap wait
> command
> in interface configuration mode. To allow the router to respond
> immediately to
> an authentication challenge, use the no form of this command. '
>
> This command is enabled by default; this means that both peers will wait
> for
> the other to authenticate first. But this is a catch-22 and the session
> will
> not come up.
> So how can it possibly work? and of course it does work....
>
> Thanks,
> Luca.
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hsec_r/
> sec_p1h.htm#wp1138806
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART