From: Darby Weaver (darbyweaver@yahoo.com)
Date: Mon Apr 23 2007 - 02:23:24 ART
Interesting problem.
I have 6 of these little fellows.
As I recall the upgrade you may require will be in the
form of a physical chip, not necessarily a software
upgrade per se.
And also check your NM-Modules - are the V2 or are
they older.
I'd suspect they are V2 and while they may be
supported in the 3620, I'd wager they are not.
Let me know.
As I said I still own 6 and might to upgrade myself.
--- Edward Norton <doubleccie@yahoo.com> wrote:
> guys ;
> I have a 3620 it has 2 FE and 2Serial cards.
> the funny thing is that when i install 12.2(40)
> image everything works really ok ...while 12.2T or
> 12.3(22) it does not detect the serial card as well
> as it does not ping via the FE ports at all .
>
> could that be a ROMMON upgrade problem ? if that
> is the case ..where can i get the lastest rommon
> ..because it is not listed on cisco site .
>
> appreciate the help
>
>
>
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
> Check outnew cars at Yahoo! Autos.
>
>
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:37 ART