From: Todd, Douglas M. (DTODD@PARTNERS.ORG)
Date: Sat Apr 21 2007 - 11:58:42 ART
Thanks-
I have already disabled inverse arp on the physical interfaces. Seems the
router is still building a table for those DLCIs which are not used in this lab.
I am getting ospf/pim adjs from routers which are in different networks even
with inverse arp disabled on the physical interfaces.
DMT
-----Original Message-----
From: Victor Cappuccio [mailto:victor@ccbootcamp.com]
Sent: Sat 4/21/2007 10:45 AM
To: Todd, Douglas M.; ccielab@groupstudy.com
Subject: RE: Frame-relay issues:
Good Point of reference
http://www.groupstudy.com/archives/ccielab/200503/msg00398.html
thanks,
Victor Cappuccio.-
Network Learning Inc - A Cisco Sponsored Organization (SO) YES! We take
Cisco Learning credits!
victor@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Rental Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
-----Original Message-----
From: nobody@groupstudy.com on behalf of Todd, Douglas M.
Sent: Sat 4/21/2007 7:35
To: ccielab@groupstudy.com
Subject: FW: Frame-relay issues:
All:
I am getting these bogus frame-relay maps on 2 routers. I have reloaded the
router w/the interfaces shutdown with the configuration below. It's like
frame-relay arp is "kind" of working when it's not enabled at all on the
interface.
Ideas?
Thanks..
Rack1R1#sh run int s1/0
Building configuration...
Current configuration : 321 bytes
!
interface Serial1/0
ip address 136.1.15.1 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 CISCO
ip ospf network point-to-point
no arp frame-relay
frame-relay map ip 136.1.15.5 105 broadcast
no frame-relay inverse-arp
end
Rack1R1#sh frame-relay map
Serial1/0 (up): ip 0.0.0.0 dlci 102(0x66,0x1860)
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 0.0.0.0 dlci 103(0x67,0x1870)
broadcast,
CISCO, status defined, inactive
Serial1/0 (up): ip 0.0.0.0 dlci 104(0x68,0x1880)
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 136.1.15.5 dlci 105(0x69,0x1890), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 0.0.0.0 dlci 113(0x71,0x1C10)
broadcast,
CISCO, status defined, inactive
Rack1R1#
The information transmitted in this electronic communication is intended only
for the person or entity to whom it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or other
use of or taking of any action in reliance upon this information by persons or
entities other than the intended recipient is prohibited. If you received this
information in error, please contact the Compliance HelpLine at 800-856-1983 and
properly dispose of this information.
The information transmitted in this electronic communication is intended only
for the person or entity to whom it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or other
use of or taking of any action in reliance upon this information by persons or
entities other than the intended recipient is prohibited. If you received this
information in error, please contact the Compliance HelpLine at 800-856-1983 and
properly dispose of this information.
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART