From: Roger (cisco@securabyte.com)
Date: Sun Apr 15 2007 - 04:38:29 ART
Thanks, Hewie. I was afraid of that. It painfully took me 2.5 hours to
upload the image via Xmodem.
-Roger
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hewie
Sent: Saturday, April 14, 2007 11:12 PM
To: Cisco
Cc: Cisco certification
Subject: Re: 3560 Image Recovery Possible?
Hi Roger,
As far as I know, Xmodem is your only option, not too slow if you crank up
the speed of your serial port.
http://www.cisco.com/en/US/partner/products/hw/switches/ps628/products_tech_
note09186a0080169696.shtml
Hewie
On 4/15/07, Cisco <cisco@securabyte.com> wrote:
>
> I just erased the entire contents of flash on my 3560 trying to update my
> switch with a newer version of an image. My switch locked up and I had to
> manually restart it and obviously now it stays in the "safe mode".
>
>
>
> Is there a way where I can boot up my switch from an image on my TFTP
> server
> the same way I would do it with a router in rommon mode?
>
>
>
>
>
> Thanks
>
> Roger
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:35 ART