From: Ali Sheeraz Mehdi (ali.mehdi@atosorigin-me.com)
Date: Thu Mar 29 2007 - 06:18:11 ART
Hi Muhabat,
I have upgraded the dynagen version and it is working now.
Thanks
Ali
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Muhabat
Sent: Wednesday, March 28, 2007 2:07 PM
To: ali.mehdi@atosorigin-me.com; ccielab@groupstudy.com
Subject: RE: Dynamips error
You can use export /all or export R8. But for this command to work you have
not stopped and restarted the routers through out the lab session time.
Second you should have at least once saved the config in side the
router/switch.
HTH
-----Original Message-----
From: Ali Sheeraz Mehdi [mailto:ali.mehdi@atosorigin-me.com]
Sent: Wednesday, March 28, 2007 12:46 PM
To: 'Muhabat'; ccielab@groupstudy.com
Subject: RE: Dynamips error
Hi Muhabat,
I tried that as well and getting the same error. Any other suggestion on
that?
Regards
-----Original Message-----
From: Muhabat [mailto:muhabat@gmail.com]
Sent: Wednesday, March 28, 2007 1:40 PM
To: 'Ali Sheeraz Mehdi'; ccielab@groupstudy.com
Subject: RE: Dynamips error
Hi,
For dyanmips/dynagen you need to do save R8 rather than save / R8, and also
make sure you are using latest software.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ali
Sheeraz Mehdi
Sent: Wednesday, March 28, 2007 12:28 PM
To: ccielab@groupstudy.com
Subject: Dynamips error
Hi,
I am facing a problem in Dynamips, whenever I try to save through Dynagen I
am getting the following error, does anybody know how to resolve this?
Everything else is working fine and I am able to make full SP lab on it.
=> save / R8
*** Dynagen has crashed ****
Please open a bug report against Dynagen at http://www.ipflow.utc.fr/bts/
Include a description of what you were doing when the error occured, your
network file, any errors output by dynamips, and the following traceback
data:
Traceback (most recent call last):
File "dynagen", line 810, in ?
File "cmd.pyc", line 142, in cmdloop
File "cmd.pyc", line 219, in onecmd
File "console.pyc", line 360, in do_save
File "configobj.pyc", line 337, in __getitem__
KeyError: '172.16.100.78'
Press ENTER to exit
I am new to Dynamips, what is process to save the router configurations so
that you can boot up the routers with the last configuration?
Regards
Ali Sheeraz Mehdi
CCIE (R/S) # 17346
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART