From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Thu Mar 29 2007 - 13:26:59 ART
hi all,
I am running dynamips and all the routers run fine wen i run IE Lab, but I
just cant find any interfaces registerring on any of my switches
(SW1.....SW4)
Help please!
Thanks
Sadiq
On 3/29/07, Ali Sheeraz Mehdi <ali.mehdi@atosorigin-me.com> wrote:
>
> Hi Muhabat,
>
> I have upgraded the dynagen version and it is working now.
>
> Thanks
>
> Ali
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Muhabat
> Sent: Wednesday, March 28, 2007 2:07 PM
> To: ali.mehdi@atosorigin-me.com; ccielab@groupstudy.com
> Subject: RE: Dynamips error
>
> You can use export /all or export R8. But for this command to work you
> have
> not stopped and restarted the routers through out the lab session time.
> Second you should have at least once saved the config in side the
> router/switch.
>
> HTH
>
> -----Original Message-----
> From: Ali Sheeraz Mehdi [mailto:ali.mehdi@atosorigin-me.com]
> Sent: Wednesday, March 28, 2007 12:46 PM
> To: 'Muhabat'; ccielab@groupstudy.com
> Subject: RE: Dynamips error
>
> Hi Muhabat,
>
> I tried that as well and getting the same error. Any other suggestion on
> that?
>
> Regards
>
>
> -----Original Message-----
> From: Muhabat [mailto:muhabat@gmail.com]
> Sent: Wednesday, March 28, 2007 1:40 PM
> To: 'Ali Sheeraz Mehdi'; ccielab@groupstudy.com
> Subject: RE: Dynamips error
>
> Hi,
> For dyanmips/dynagen you need to do save R8 rather than save / R8, and
> also
> make sure you are using latest software.
>
> HTH
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ali
> Sheeraz Mehdi
> Sent: Wednesday, March 28, 2007 12:28 PM
> To: ccielab@groupstudy.com
> Subject: Dynamips error
>
> Hi,
>
>
>
> I am facing a problem in Dynamips, whenever I try to save through Dynagen
> I
> am getting the following error, does anybody know how to resolve this?
> Everything else is working fine and I am able to make full SP lab on it.
>
>
>
> => save / R8
>
> *** Dynagen has crashed ****
>
> Please open a bug report against Dynagen at http://www.ipflow.utc.fr/bts/
>
> Include a description of what you were doing when the error occured, your
>
> network file, any errors output by dynamips, and the following traceback
> data:
>
>
>
> Traceback (most recent call last):
>
> File "dynagen", line 810, in ?
>
> File "cmd.pyc", line 142, in cmdloop
>
> File "cmd.pyc", line 219, in onecmd
>
> File "console.pyc", line 360, in do_save
>
> File "configobj.pyc", line 337, in __getitem__
>
> KeyError: '172.16.100.78'
>
> Press ENTER to exit
>
>
>
>
>
> I am new to Dynamips, what is process to save the router configurations so
> that you can boot up the routers with the last configuration?
>
>
>
> Regards
>
> Ali Sheeraz Mehdi
>
> CCIE (R/S) # 17346
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART