From: Keith Foster (keith.foster@gmail.com)
Date: Tue Mar 20 2007 - 21:54:28 ART
The IOS version supports the module.
Did you see any errors on the console during bootup?
On 3/20/07, Gobind <gobind@inbox.com> wrote:
>
> Hi,
>
> I have just installed NM-2FE2w v2 in 3640 (C3640-IS-M), Version 12.4(12)
> IOS,and it is now working and under "show diag" comamnd it is showing the
> following :-
>
> Router#sh diag
> Slot 0:
> NM-2FE2W_V2 Port adapter, 2 ports
> Port adapter is disabled
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> Hardware Revision : 1.0
> Top Assy. Part Number : 800-21601-01
> Board Revision : B0
> Deviation Number : 0-0
> Fab Version &nbs p; : 01
> PCB Serial Number : FOC09014BBZ
> RMA Test History : 00
> RMA Number ; : 0-0-0-0
> RMA History &nbs p; : 00
> Product (FRU) Number : NM-2FE2W-V2=
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 03 97 41 01 00 C0 46 03 20 00 54 61 01
> 0x10: 42 42 30 80 00 00 00 00 02 01 C1 8B 46 4F 43 30
> 0x20: 39 30 31 34 42 42 5A 03 00 81 00 00 00 00 04 00
> 0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
> Slot 2:
> NM-2FE2W Port adapter, 2 ports
> Port adapter is disabled
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> Hardware Revision : 1.0
> Top Assy. Part Number : 800-04797-01
> Board Revision : G0
> Deviation Number : 0-0
> Fab Version &nbs p; : 05
> PCB Serial Number : JAD06250GBE
> RMA Test History : 00
> RMA Number ; : 0-0-0-0
> RMA History &nbs p; : 00
> Product (FRU) Number : NM-2FE2W=
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 00 D8 41 01 00 C0 46 03 20 00 12 BD 01
> 0x10: 42 47 30 80 00 00 00 00 02 05 C1 8B 4A 41 44 30
> 0x20: 36 32 35 30 47 42 45 03 00 81 00 00 00 00 04 00
> 0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
> Also the output of show version command :-
>
> outer#sh ver
> Cisco IOS Software, 3600 Software (C3640-IS-M), Version 12.4(12), RELEASE
> SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport< BR>Copyright (c)
> 1986-2006 by Cisco Systems, Inc.
> Compiled Fri 17-Nov-06 13:59 by prod_rel_team
>
> ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> SOFTWARE (fc1)
>
> Router uptime is 3 minutes
> System returned to ROM by power-on
> System image file is "flash:2.bin"
>
> Cisco 3640 (R4700) processor (revision 0x00) with 124928K/6144K bytes of
> memory.
> Processor board ID 29400549
> R4700 CPU at 100MHz, Implementation 33, Rev 1.0
> 1 FastEthernet interface
> DRAM configuration is 64 bits wide with parity disabled.
> 125K bytes of NVRAM.
> 32768K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> It is showing up that is disabled,but this module is supported(NM2FE2W
> v2) after 12.2(14) and above and I have installed 12.4,also tried 12.4
> enterprise edition as IOS,but think the problem is something else
>
> Kindly help me out!
>
> Regards,
>
> Gobind
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART