From: Robert McCallum (RMcCallum@thrupoint.net)
Date: Mon Mar 19 2007 - 09:44:59 ART
Hmm I thought I had replied to this. Oh well - Clue : Check your IGP Global
commands.
Robert McCallum
Senior Consultant
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Dishan Gamage
> Sent: 19 March 2007 11:44
> To: Cisco certification; Cisco certification
> Subject: mpls ldp authentication question !!
>
> Hi Group
>
>
>
> I have PE1 & PE2 configured to use md5 for LDP, working fine...
>
> PE1
>
> mpls ldp neighbor 172.16.12.2 password abcdef
>
>
> PE2
>
> mpls ldp neighbor 172.16.12.1 password abcdef
>
>
> the question says to block a new PE (eg PE3), from joining into the mpls
> domain without using an ACL
>
> I see that when PE3 boots up it also establish ldp neighbor
> relationships..................
>
> can someone explain how this can be done ??
>
> tks in advance
> dishan
>
> _____________________________________________________________________
> Subscription information: http://www.groupstudy.com/list/comserv.html
Note:The information contained in this message may be privileged and confidential and protected from disclosure . If the reader of this message is not the
intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us
immediately by replying to the message and deleting it from your computer. Thankyou. ThruPoint Ltd.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART