From: Sasa Milic (smilic2@pexim.co.yu)
Date: Mon Mar 19 2007 - 07:31:13 ART
Only "default" method is used, and you cannot specify another one instead.
Sasa
#8635
----- Original Message -----
From: "Bit Gossip" <bit.gossip@chello.nl>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 17, 2007 7:01 PM
Subject: aaa authentication dot1x
> Group,
> to explore of the possible options of this feature I tried to configure:
>
> aaa authentication dot1x T1.7 group radius
>
> instead of
>
> aaa authentication dot1x default group radius
>
> But then, in interface config mode I can not find any way to recall my
> method
> T1.7.
>
> How can one configure a port to use dot1x method xxxxx ?
> If it is not possible, it means that I have to use default by all means?
>
> Thanks,
> Luca.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART