From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Wed Mar 14 2007 - 20:25:34 ART
You need the 'subnets' keyword in the redistribute statement.
Also, make sure R6 has 183.1.6.0/24 listed as 'C' route on its routing
table.
----- Original Message -----
From: "Shine" <shinejoseph@iprimus.com.au>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 14, 2007 7:12 PM
Subject: IEWB ver3.0 Lab 1 task 3.3
> Hi Group,
>
> I am having trouble in redistributing the connected interface to OSPF in
> the
> above task. I have configured the routers exactly as in the configuration
> guide, but the route is not available in routing table of R4.
>
> Can somebody help me?
>
> The router R6 config is as follows.:
>
> router ospf 1
> router-id 150.1.6.6
> log-adjacency-changes
> redistribute connected route-map CONNECTED2OSPF
> network 150.1.6.6 0.0.0.0 area 46
> network 183.1.46.6 0.0.0.0 area 46
> ip prefix-list VLAN_6 seq 5 permit 183.1.6.0/24
> route-map CONNECTED2OSPF permit 10
> match ip address prefix-list VLAN_6
>
> TIA
> Shine
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART