From: Hossam Abbas (habbas97@yahoo.com)
Date: Wed Mar 14 2007 - 10:46:18 ART
No i don't
Rack1R3#sh fram map
Serial0/1/0 (up): ip 183.1.123.1 dlci 302(0x12E,0x48E0), static,
CISCO, status defined, active
Serial0/1/0 (up): ip 183.1.123.2 dlci 302(0x12E,0x48E0), static,
broadcast,
CISCO, status defined, active
Serial0/1/1 (up): ip 183.1.0.4 dlci 315(0x13B,0x4CB0), static,
CISCO, status defined, active
Serial0/1/1 (up): ip 183.1.0.5 dlci 315(0x13B,0x4CB0), static,
broadcast,
CISCO, status defined, active
inverse arp is desiabled, but i don't think i need this on R3 since there are two physical interfaces
interface Serial0/1/1
ip address 183.1.0.3 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
ip ospf network broadcast
ip ospf dead-interval minimal hello-multiplier 3
ip ospf priority 0
frame-relay map ip 183.1.0.4 315
frame-relay map ip 183.1.0.5 315 broadcast
no frame-relay inverse-arp
----- Original Message ----
From: Edison Ortiz <edisonmortiz@gmail.com>
To: Hossam Abbas <habbas97@yahoo.com>; ccielab@groupstudy.com
Sent: Wednesday, March 14, 2007 3:26:07 PM
Subject: Re: Internetwork expert v4 lab 1 Multicast
Check the 'show frame map' in R3. I bet you have some mappings from R2 on
S1/1
You need to disable inverse-arp for that DLCI.
----- Original Message -----
From: "Hossam Abbas" <habbas97@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 14, 2007 8:20 AM
Subject: Internetwork expert v4 lab 1 Multicast
>I have a small question in Internetwork expert v4 lab 1 Multicast task 5.1
>in the Task 5.1 Verification
>
> Rack1R3#show ip pim neighbor
> PIM Neighbor Table
> Neighbor Interface Uptime/Expires Ver DR
> Address Prio/Mode
> 183.1.123.2 Serial1/0 00:01:55/00:01:18 v2 1 / S
> 183.1.123.2 Serial1/1 00:01:26/00:01:18 v2 1 / DR S
> 183.1.0.5 Serial1/1 00:01:39/00:01:18 v2 1 / S
>
> How R3 see neighbr R2 through int s1/1 although multicast routing is not
> enabled on R1, SW1, and SW4?
>
> thanks
>
>
>
> ____________________________________________________________________________________
> Never miss an email again!
> Yahoo! Toolbar alerts you the instant new Mail arrives.
> http://tools.search.yahoo.com/toolbar/features/mail/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART