Re: Cisco 3845 router SPAN support

From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Mon Mar 12 2007 - 13:18:19 ART


Hi Chuck,
Thanks for your inputs, no there is no switch port command and it turns out
that it's not supported. In 16 port switch+1giga (NME-16e-1G) does support
the mirroring feature/span feature.

Frog

On 3/13/07, Church, Charles <cchurch@multimax.com> wrote:
>
> I believe SPAN is only supported on the various Ethernet switch modules.
> If a port in question doesn't support the 'switchport' command, it most
> likely won't support SPAN either. I think there is a technology that
> will do it, part of the Lawful Intercept family maybe. Can't think of
> it offhand though.
>
>
> Chuck Church
> Network Engineer
> CCIE #8776, MCNE, MCSE
> Multimax, Inc.
> Enterprise Network Engineering
> Home Office - 864-335-9473
> Cell - 864-266-3978
> cchurch@multimax.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Radioactive Frog
> Sent: Sunday, March 11, 2007 9:22 PM
> To: Cisco certification
> Subject: Cisco 3845 router SPAN support
>
> Hi group,
> Just wondering if anyone has experience on the Cisco 3845 for SPAN (Port
> mirroring) support.
>
> I am getting the following error when I put the command:
>
>
> Enter configuration commands, one per line. End with CNTL/Z.
> France(config)#monitor session 1 source interface g0/0
> Interface GigabitEthernet0/0 does not support SPAN
> Please, unconfigure it.
>
> France(config)#monitor session 1 source interface g0/0
> France(config)#monitor session 1 destination interface g2/0
> Interface GigabitEthernet2/0 does not support SPAN
>
> Please, unconfigure it.
>
> France(config)#monitor session 1 destination interface g2/0
>
> France(config)#^
>
> Interface GigabitEthernet0/0 does not support SPAN
>
> Please, unconfigure it.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART