From: Sean.Zimmerman@clubcorp.com
Date: Mon Mar 12 2007 - 18:30:18 ART
You may be able to use the traffic export feature:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part30/h_rawip.htm
Sean
"Church, Charles" <cchurch@multimax.com>
Sent by: nobody@groupstudy.com
03/12/2007 09:26 AM
Please respond to
"Church, Charles" <cchurch@multimax.com>
To
"Radioactive Frog" <pbhatkoti@gmail.com>, "Cisco certification"
<ccielab@groupstudy.com>
cc
Subject
RE: Cisco 3845 router SPAN support
I believe SPAN is only supported on the various Ethernet switch modules.
If a port in question doesn't support the 'switchport' command, it most
likely won't support SPAN either. I think there is a technology that
will do it, part of the Lawful Intercept family maybe. Can't think of
it offhand though.
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Multimax, Inc.
Enterprise Network Engineering
Home Office - 864-335-9473
Cell - 864-266-3978
cchurch@multimax.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Radioactive Frog
Sent: Sunday, March 11, 2007 9:22 PM
To: Cisco certification
Subject: Cisco 3845 router SPAN support
Hi group,
Just wondering if anyone has experience on the Cisco 3845 for SPAN (Port
mirroring) support.
I am getting the following error when I put the command:
Enter configuration commands, one per line. End with CNTL/Z.
France(config)#monitor session 1 source interface g0/0
Interface GigabitEthernet0/0 does not support SPAN
Please, unconfigure it.
France(config)#monitor session 1 source interface g0/0
France(config)#monitor session 1 destination interface g2/0
Interface GigabitEthernet2/0 does not support SPAN
Please, unconfigure it.
France(config)#monitor session 1 destination interface g2/0
France(config)#^
Interface GigabitEthernet0/0 does not support SPAN
Please, unconfigure it.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART