From: ian (iyux2000@gmail.com)
Date: Mon Mar 12 2007 - 07:51:42 ART
Ivan,How are you#!
I'am not very familar with "ip source binding" command. Ivan, can you explain a little bit more detailed about this command. Thank you.
Does this command can work with "port-security" to check against both ip address and mac-address on one single interface?
For example, if i configure it as follows:
interface fa0/1
switchport port-security
switchport port-security mac-address 1234.1234.1234
ip source binding 1234.1234.1234 vlan 5 10.10.10.1 interface fa0/1
======= 2007-03-12 20:00:22 What you've mentioned in your letter#:=======
>http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12235se/cr/cli1.htm#wp9079071
>
>On Monday 12 March 2007 11:51, achievewoo@gmail.com wrote:
>> Hi, GS
>> To achieve switch security, We usually use "switchport port-security"
>> command to bind layer 2 address and against untursted devices connecting
>> switch. My question is: Is it possible to let switchport bind an stable
>> layer 3 at the same time?
>>
>> Thanks!
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>--
>Ivan
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
= = = = = = = = = = = = = = = = = = = =
!!!!!!!!!!!!!!!!Have a nice day.
!!!!!!!!!!!!!!!!ian
!!!!!!!!!!!!!!!!iyux2000@gmail.com
!!!!!!!!!!!!!!!!!!!!2007-03-12
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART