Lock&key

From: achievewoo@gmail.com
Date: Sat Mar 10 2007 - 20:46:12 ART

Hi,GS
  Here is lock&key question: R1 should go throught and be authenticated by R2 with username (ccie) and password (cisco), then R1 can telnet to other routers.
  I used dynamic access-list in lock&key. So, R1 can telnet to other routers successfully.
  However, I found R1 can not login R2 anymore with the same username and password.
  The output is as follows:
 % List#DYNAMIC-DYC already contains this IP address pair
[Connection to 100.100.100.2 closed by foreign host]
   
   Except creating another username and password to allow R1 telnet and login R2, is there other method to reach the target?

  thanks!

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART