From: Jeff Mullan (jmullan78@gmail.com)
Date: Sat Mar 10 2007 - 09:29:51 ART
Thanks Digital !! Looks like you never sleep :)
-JM
On 3/10/07, Jeff Mullan <jmullan78@gmail.com> wrote:
>
> Folks,
> In the scenario below, I dont have an IP address on the main interface and
> using sub-Interface for IP address configuration. I dont see a point here
> disabling in-arp on s2/2 even though the questions specifically says " dont
> dynamically learn arp " . Am I correct in my understanding ?
> This scenario is from one of the vendors WB and they have explicitly
> disabled inarp on the main interface. Any thoughts ?
> Thanks,
> -JM
>
>
>
> interface Serial2/2
> no ip address
> encapsulation frame-relay
> end
>
>
> R3#sh run int s2/2.1
> Building configuration...
>
> %Serial2/2.1 :Header-Compression not configured on interface
> Current configuration : 117 bytes
> !
> interface Serial2/2.1 point-to-point
> ip address 141.1.123.3 255.255.255.0
> frame-relay interface-dlci 302
> end
> R3#
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART