From: Scott Morris (swm@emanon.com)
Date: Fri Mar 09 2007 - 11:14:15 ART
Did you remember to put the interface (on the switch) that the router is
plugged into in "switchport access vlan 7"???
You're getting an ARP failure (show arp would list incomplete).
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edward Norton
Sent: Friday, March 09, 2007 8:19 AM
To: ccielab@groupstudy.com
Subject: simple problem
guys
.a router (3620) connected to switch and im trying to ping from the router
to the switch vlan interface , for some unknown reason .. ping is not
successful ...configuration on the router is very simple as
!
interface FastEthernet0/1
ip address 20.1.23.2 255.255.255.0
duplex auto
speed auto
!
on the switch
!
interface Vlan7
ip address 20.1.23.8 255.255.255.0
!
interfaces are UP ...vlan is configured properly .
when i did debug to see why it is not pinging ..i got an encasultion
failure ..routed via RIB ...wat is that ???
*Mar 1 00:17:35.207: IP: s=20.1.23.2 (local), d=20.1.23.8
(FastEthernet0/1), le n 100, encapsulation failed
*Mar 1 00:17:35.207: ICMP type=8, code=0.
*Mar 1 00:17:37.207: IP: tableid=0, s=20.1.23.2 (local), d=20.1.23.8
(FastEther net0/1), routed via RIB *Mar 1 00:17:37.207: IP: s=20.1.23.2
(local), d=20.1.23.8 (FastEthernet0/1), le n 100, sending
*Mar 1 00:17:37.207: ICMP type=8, code=0
*Mar 1 00:17:37.207: IP: s=20.1.23.2 (local), d=20.1.23.8
(FastEthernet0/1), le n 100, encapsulation failed
*Mar 1 00:17:37.207: ICMP type=8, code=0.
Success rate is 0 percent (0/5)
any help is appreciated
ReGaRdS
---------------------------------
Don't be flakey. Get Yahoo! Mail for Mobile and always stay connected to
friends.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART