From: kenza@kenza.nl
Date: Fri Mar 09 2007 - 05:49:38 ART
You mean local interfaces ? like your serial when configured for
frame-relay.
You cannot ping your own IP address on a multipoint Frame Relay interface.
To make a ping successful on your local serial interface
configure a layer 3 static mapping to your local interface.
rgds,
Kenza.
Senior Network Engineer
http://cisco.pagina.nl
----- Original Message -----
From: <Sean.Zimmerman@clubcorp.com>
To: <ccielab@groupstudy.com>
Sent: Friday, March 09, 2007 1:53 AM
Subject: Local Pings
> Is it possible to permit local pings one either PPP over Frame or IP over
> IPV6 tunnel interfaces?
>
> Sean
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te
informeren. Wij adviseren u om bij twijfel over de juistheid of de
volledigheid van de mail contact met afzender op te nemen.
This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART