From: Shamin (ccie.xpert@gmail.com)
Date: Mon Mar 05 2007 - 10:54:07 ART
Hi All,
First of all Darby, I have tried the setup without PPPover FR and everything
works perfectly fine.
Updates are received throughout. So here there is no issue of the neighbor
command I suppose.
Output on R4 for eigrp neibhors with EIGRP over PPP over Frame is as below.
Rack1R4#sh ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 158.1.44.3 Vi1 11 00:00:34 1 3000 0 16
I tried to disable PPP authentication on all three routers and still had the
same problem.
I did some of the debug eigrp packets command on R4 and could see that there
are HELLO, UPDATE and ACK packets being exchanged between R4 & R3. But R4
does not receive any
EIGRP routes from R3. But R3 receives the Loopback of R4.
As antonio mentioned , I tried with two Virtual-templates on R3. The Eigrp
adjacency were formed but still had the same issue. Tried disabling
"split-horizon" on the Virtual-Template on R3, this also did not help.
At last I removed the PPPover Frame config and did normal EIGRP over Frame
and everything seems to work perfectly. I still cant get the reason for this
kind of one way update between R3 and R4 i.e R3 is receiving R4's Loopback
route whereas R4 does not receive R3's loopback route.
Regards and thanks
shamin
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART