From: Darby Weaver (darbyweaver@yahoo.com)
Date: Mon Mar 05 2007 - 12:21:59 ART
Shamin,
Which version of IOS and model of router are you
using?
Curious, I'll try this this afternoon when I make it
home.
Darby
--- Shamin <ccie.xpert@gmail.com> wrote:
> Hi All,
>
> First of all Darby, I have tried the setup without
> PPPover FR and everything
> works perfectly fine.
> Updates are received throughout. So here there is no
> issue of the neighbor
> command I suppose.
> Output on R4 for eigrp neibhors with EIGRP over PPP
> over Frame is as below.
>
> Rack1R4#sh ip eigrp neighbors
> IP-EIGRP neighbors for process 10
> H Address Interface Hold
> Uptime SRTT RTO Q Seq
> (sec)
> (ms) Cnt Num
>
> 0 158.1.44.3 Vi1 11
> 00:00:34 1 3000 0 16
>
>
> I tried to disable PPP authentication on all three
> routers and still had the
> same problem.
> I did some of the debug eigrp packets command on R4
> and could see that there
> are HELLO, UPDATE and ACK packets being exchanged
> between R4 & R3. But R4
> does not receive any
> EIGRP routes from R3. But R3 receives the Loopback
> of R4.
>
> As antonio mentioned , I tried with two
> Virtual-templates on R3. The Eigrp
> adjacency were formed but still had the same issue.
> Tried disabling
> "split-horizon" on the Virtual-Template on R3, this
> also did not help.
>
> At last I removed the PPPover Frame config and did
> normal EIGRP over Frame
> and everything seems to work perfectly. I still cant
> get the reason for this
> kind of one way update between R3 and R4 i.e R3 is
> receiving R4's Loopback
> route whereas R4 does not receive R3's loopback
> route.
>
> Regards and thanks
> shamin
>
>
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART