From: anthony.sequeira@thomson.com
Date: Fri Mar 02 2007 - 12:50:17 ART
LAST WEEK'S ANSWER:
Answer: a, c
Topic Domain: 7e
Issues:
Can Auto-RP be used with PIM Sparse mode? What about Sparse-Dense mode?
Can it be used in conjunction with Anycast RP? What is the correct
command to configure the RP mapping agent?
Solutions:
Sparse Mode PIM can be used for Auto-RP, but you must also use the
Auto-RP listener feature. Sparse-Dense Mode PIM can also be used with
Auto-RP, but remember that this configuration may result in a fallback
to Dense Mode operations. Auto-RP can be used in conjunction with
Anycast RP, but it cannot be used in conjunction with BSR. The correct
command to configure a mapping agent is ip pim send-rp-discovery.
More Information:
Configuring Sparse Mode with Auto RP
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hi
mc_c/chap05/mcbbasic.htm#wp1112026
LAST WEEK'S QUESTION:
7-11-2. Which of the following statements regarding Auto-RP are correct?
Choose all that apply.
a. Sparse Mode PIM must be used in conjunction with the Auto-RP
listener feature
b. Sparse-Dense Mode PIM is not supported with Auto-RP
c. Auto-RP can be used with Anycast RP
d. The command ip pim send-rp-announce is used to configure the RP
mapping agent
THIS WEEK'S QUESTION:
4-2-3. You would like to configure the EIGRP stub feature on your remote
office router. You are curious which routes this router will send to the
distribution router at headquarters by default if you use the stub
command with no options. Which routes are sent? Choose all that apply.
a. Summary
b. Connected
c. Static
d. None of these options are correct
Question of the Week Compliments of:
TESTiT
http://www.netmasterclass.com/site/written.php
Copyright (c) 2002-2007 NetMasterClass, LLC. All rights reserved.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:49 ART