From: Mohamed T. Kondela (mtaib@sagia.gov.sa)
Date: Wed Feb 28 2007 - 09:49:53 ART
Gobind,
I think MS ISA Server or MS RRAS are best Solution, again if you don't
need to run the 'black box'. I think MS ISA has some upper-hand due to
its proxy skills.
Regards
Mohamed T. Kondela
Senior Network Engineer
IT Dept.
Fax: 4473037 x 303
mtaib@sagia.gov.sa
Saudi Arabian General Investment Authority
--------------------------------------------------------
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
--------------------------------------------------------
-----Original Message-----
From: Gobind [mailto:gobind@inbox.com]
Sent: Wednesday, February 28, 2007 3:40 PM
To: Mohamed T. Kondela; ccielab@groupstudy.com
Subject: RE: Interesting Question,Any answer?
Importance: High
An Update to question:-
That guy has updated he question me:
He is saying that you can use any technology or router in between the
switch,but:-
He wants to Browse 192.168.0.1 host on Floor 2 from a host 192.168.0.1
on Floor 1,he is kind of daring me now to give the solution now,lol.
Cheers
Gobind
> -----Original Message-----
> From: mtaib@sagia.gov.sa
> Sent: Wed, 28 Feb 2007 15:04:49 +0300
> To: gobind@inbox.com, ccielab@groupstudy.com
> Subject: RE: Interesting Question,Any answer?
>
> NAT was the quickest solution, but I think 3550 wont support NAT. I
> remember that 6500 with right module can support NAT.
>
> IF you don't want to add a 'Router Black Box' in between you can add
a
> MS ISA server between and do NAT/Route between these dittos. :)
>
> Regards
>
> Mohamed T. Kondela
> Senior Network Engineer
> IT Dept.
> Fax: 4473037 x 303
> mtaib@sagia.gov.sa
> Saudi Arabian General Investment Authority
>
> --------------------------------------------------------
> This message contains confidential information and is intended only
for
> the individual named. If you are not the named addressee you should
not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be
> intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
> contain viruses. The sender therefore does not accept liability for
any
> errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission. If verification is required please
request
> a hard-copy version.
> --------------------------------------------------------
>
> -----Original Message-----
>
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Gobind
> Sent: Wednesday, February 28, 2007 2:38 PM
> To: ccielab@groupstudy.com; bdennis@internetworkexpert.com; Brian
> McGahan; Scott Morris
> Subject: Interesting Question,Any answer?
>
> Hi Guys,
>
> Some one asked me this question,Its really interesting,Though should
> post
> it out here.here it is:-
>
> There are two floors in a company which contains two Switches(each
floor
> has one--3550 Switch).
>
> Floor one contains 20 hosts with IP address ranging frm
> 192.168.1.1-192.168.1.20
>
> Floor Two also contains IP address with same IP address ranging from
> 192.168.1.1-192.168.1.20
>
> Now he said that he wants the switch at Floor 1 be able to ping Floor
> 2(like from 192.168.1.1 at Floor 1 to 192.168.1.1 at Floor 2) and
> exchange traffic and stuff,and the condition is that you dont have to
> use
> any router in between two switches.
>
> So what could be the possible answer/config?
>
> Cheers
>
> Gobind
>
>
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART