From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Sat Feb 24 2007 - 12:14:47 ART
Make sure that VLAN100 exists on S2. You will need to configure it manually
since the switch is in transparent mode.
On 2/24/07, Muhabat <muhabat@gmail.com> wrote:
>
> Hi GS,
>
>
>
> I have created one configuration like this:
>
>
>
> R1
>
> S1---------------------S2------------------------------S3
>
>
>
> Server Transparent Client
>
>
>
> I have created Vlan 100, Vlan 200 and Vlan 300 on S1. After establishing
> trunks between switches I found that vlans from S1 are propagating to S3
> through (vtp transparent mode) S2.
>
>
>
> s1#sh vtp status
>
> VTP Version : 2
>
> Configuration Revision : 1
>
> Maximum VLANs supported locally : 256
>
> Number of existing VLANs : 8
>
> VTP Operating Mode : Server
>
> VTP Domain Name : test
>
> VTP Pruning Mode : Disabled
>
> VTP V2 Mode : Disabled
>
> VTP Traps Generation : Disabled
>
> MD5 digest : 0xD9 0x56 0x10 0x46 0xCB 0xFF 0xF9 0x64
>
> Configuration last modified by 0.0.0.0 at 3-1-02 00:17:34
>
> Local updater ID is 192.168.100.100 on interface Vl100 (lowest numbered
> VLAN
> interface found)
>
>
>
>
>
> s2#sh vtp status
>
> VTP Version : 2
>
> Configuration Revision : 0
>
> Maximum VLANs supported locally : 256
>
> Number of existing VLANs : 5
>
> VTP Operating Mode : Transparent
>
> VTP Domain Name : test
>
> VTP Pruning Mode : Disabled
>
> VTP V2 Mode : Disabled
>
> VTP Traps Generation : Disabled
>
> MD5 digest : 0x1A 0x89 0xC2 0x6C 0x8A 0x87 0xB5 0x9A
>
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
>
>
>
> s3(config)#svs
>
> VTP Version : 2
>
> Configuration Revision : 1
>
> Maximum VLANs supported locally : 256
>
> Number of existing VLANs : 8
>
> VTP Operating Mode : Client
>
> VTP Domain Name : ExamUp.com
>
> VTP Pruning Mode : Disabled
>
> VTP V2 Mode : Disabled
>
> VTP Traps Generation : Disabled
>
> MD5 digest : 0xD9 0x56 0x10 0x46 0xCB 0xFF 0xF9 0x64
>
> Configuration last modified by 0.0.0.0 at 3-1-02 00:17:34
>
>
>
> I put two interfaces in vlan 100 at s1 and s2, but they were unable to
> communicate with each other, although both are in same vlan and interfaces
> are configured for access mode.
>
>
>
> S1
>
>
>
> Port Name Status Vlan Duplex Speed Type
>
> Fa1/0 connected trunk a-full 100
> 10/100BaseTX
>
> Fa1/1 notconnect 1 auto auto
> 10/100BaseTX
>
> Fa1/2 notconnect 1 auto auto
> 10/100BaseTX
>
> Fa1/3 Interface for Vlan connected 100 a-full a-100
> 10/100BaseTX
>
>
>
> S3
>
>
>
> Port Name Status Vlan Duplex Speed Type
>
> Fa1/0 notconnect 1 auto auto
> 10/100BaseTX
>
> Fa1/1 connected trunk a-full 100
> 10/100BaseTX
>
> Fa1/2 notconnect 1 auto auto
> 10/100BaseTX
>
> Fa1/3 interface f1/3 - 6 connected 100 full 100
> 10/100BaseTX
>
>
>
> Still I am not able to ping within the same vlan 100. Any help will be
> highly appreciated.
>
>
>
>
>
> Best Regards,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART