From: Digital Yemeni (digital-yemeni@hotmail.com)
Date: Fri Feb 23 2007 - 21:12:41 ART
THIS WEEK'S QUESTION:
7-11-2. Which of the following statements regarding Auto-RP are correct?
Choose all that apply.
a.Sparse Mode PIM must be used in conjunction with the Auto-RP listener
feature
b.Sparse-Dense Mode PIM is not supported with Auto-RP
c.Auto-RP can be used with Anycast RP
d.The command ip pim send-rp-announce is used to configure the RP mapping
agent
Answer:
Since Multicast had changed the color of my hair into WHITE, YELLOW, and
BLUE before eventually has dropped, i can safely say that the answer is,,,,a
& c
Best Regards,
Digital
-------------------------------------------------------------------------------------------------------------------------------------
********************************************************************
*.* You'll NEVER succeed as a "CCIE" until you LOVE Cisco MORE than your
sleep! *.*
********************************************************************
I'm expected to be busy for the next 57 years + CCIE preparation adds on
that a bit. Therefore, please be concise on your email. Thank you!
>From: <anthony.sequeira@thomson.com>
>Reply-To: <anthony.sequeira@thomson.com>
>To: <ccielab@groupstudy.com>
>Subject: CCIE Certification Question of the Week - FEB2307
>Date: Fri, 23 Feb 2007 10:41:50 -0500
>
>LAST WEEK'S ANSWER:
>Answer: d
>
>Topic Domain: 3e
>
>Issues:
>What is the most likely problem with this configuration?
>
>Solutions:
>EIGRPv6 requires the use of the no shutdown command under router
>configuration mode. The default state for the routing process is
>shutdown, just like an interface.
>
>More Information:
>How to Implement EIGRP for IPv6
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
>ipv6_c/v6eigrp.htm#wp1049328
>
>LAST WEEK'S QUESTION:
>3-11-2. Examine the configurations shown in Exhibit 1. R1 and R2 are not
>forming an EIGRPv6 adjacency. You have confirmed the link between them
>is in the UP/UP state. What is the most likely issue?
>
>a. The Router IDs configured on the devices are in an invalid format
>b. The IPv6 addresses of the interfaces must be in the Modified-EUI
>format
>c. Your platform does not fully support EIGRPv6
>d. You must use the no shutdown command under router configuration mode
>
>Exhibit 1
>R1
>ipv6 unicast-routing
>!
>ipv6 router eigrp 100
>router-id 0.0.0.1
>!
>interface serial 0/0/1
>ipv6 address 12::1/64
>ipv6 eigrp 100
>
>R2
>ipv6 unicast-routing
>!
>ipv6 router eigrp 100
>router-id 0.0.0.2
>!
>interface serial 0/0/1
>ipv6 address 12::2/64
>ipv6 eigrp 100
>
>THIS WEEK'S QUESTION:
>7-11-2. Which of the following statements regarding Auto-RP are correct?
>Choose all that apply.
>a. Sparse Mode PIM must be used in conjunction with the Auto-RP
>listener feature
>b. Sparse-Dense Mode PIM is not supported with Auto-RP
>c. Auto-RP can be used with Anycast RP
>d. The command ip pim send-rp-announce is used to configure the RP
>mapping agent
>
>Question of the Week Compliments of:
>
>TESTiT
>
>http://www.netmasterclass.com/site/written.php
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART