From: anthony.sequeira@thomson.com
Date: Fri Feb 23 2007 - 12:41:50 ART
LAST WEEK'S ANSWER:
Answer: d
Topic Domain: 3e
Issues:
What is the most likely problem with this configuration?
Solutions:
EIGRPv6 requires the use of the no shutdown command under router
configuration mode. The default state for the routing process is
shutdown, just like an interface.
More Information:
How to Implement EIGRP for IPv6
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
ipv6_c/v6eigrp.htm#wp1049328
LAST WEEK'S QUESTION:
3-11-2. Examine the configurations shown in Exhibit 1. R1 and R2 are not
forming an EIGRPv6 adjacency. You have confirmed the link between them
is in the UP/UP state. What is the most likely issue?
a. The Router IDs configured on the devices are in an invalid format
b. The IPv6 addresses of the interfaces must be in the Modified-EUI
format
c. Your platform does not fully support EIGRPv6
d. You must use the no shutdown command under router configuration mode
Exhibit 1
R1
ipv6 unicast-routing
!
ipv6 router eigrp 100
router-id 0.0.0.1
!
interface serial 0/0/1
ipv6 address 12::1/64
ipv6 eigrp 100
R2
ipv6 unicast-routing
!
ipv6 router eigrp 100
router-id 0.0.0.2
!
interface serial 0/0/1
ipv6 address 12::2/64
ipv6 eigrp 100
THIS WEEK'S QUESTION:
7-11-2. Which of the following statements regarding Auto-RP are correct?
Choose all that apply.
a. Sparse Mode PIM must be used in conjunction with the Auto-RP
listener feature
b. Sparse-Dense Mode PIM is not supported with Auto-RP
c. Auto-RP can be used with Anycast RP
d. The command ip pim send-rp-announce is used to configure the RP
mapping agent
Question of the Week Compliments of:
TESTiT
http://www.netmasterclass.com/site/written.php
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART