From: ian (iyux2000@gmail.com)
Date: Thu Feb 22 2007 - 19:50:49 ART
Darrin K. Pierce,How are you#!
But how to control which one is "active", which one is "standby"?
I do know this can be achieved by using highest ip address announced.
However, is there any other ways more graceful than this?
And another question is that do I allowed to use BSR in a real CCIE lab?
======= 2007-02-23 03:03:31 What you've mentioned in your letter#:=======
>With Auto-RP, the Mapping Agent selects the RP for a specific group based on
>the Highest IP Address. All Mapping Agents (if you have redundant ones
>configured) will send out the same RP-to-Group mapping information. So, the
>RP with the Highest IP address is "active" and the other RP is simply
>standing by.
>
>Should the "active" RP stop sending updates, when the RP-to-Group mappings
>time out, the Mapping Agent will then advertise the "standby" RP as "active"
>
>Darrin
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Digital Yemeni
>Sent: Thursday, February 22, 2007 4:02 AM
>To: achievewoo@gmail.com
>Cc: ccielab@groupstudy.com
>Subject: Re: RE: how to set backup RP in spare-mode?
>
>Ya i got you question wrongly! I did send another email saying that there is
>
>no back RP in AutoRP mode unless you use MSDP which is quite lengthy
>process. Also, that's an Active-Active back RP, kinda loadbalancing! of
>course, if one RP fails then the other will back it up!
>
>GS Guys, please correct me if i'm WRONG!
>
>
>
>
>Best Regards,
>
>Digital
>----------------------------------------------------------------------------
>------------------------------------------------------------------
>I'm expected to be busy for the next 57 years + CCIE preparation adds on
>that a bit. Therefore, please be concise on your email. Thank you!
>
>
>
>
>
>>From: achievewoo@gmail.com
>>To: digital-yemeni@hotmail.com
>>Subject: Re: RE: how to set backup RP in spare-mode?
>>Date: Thu, 22 Feb 2007 03:50:39 -0500
>>
>>Thanks for your reponse, My question is how to make one RP to be backup RP
>>in Atuo-RP?
>>I check the CD, it states agent will chose RP according the highest IP
>>address if multiple RPs support one multicast group.
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
= = = = = = = = = = = = = = = = = = = =
!!!!!!!!!!!!!!!!Have a nice day.
!!!!!!!!!!!!!!!!ian
!!!!!!!!!!!!!!!!iyux2000@gmail.com
!!!!!!!!!!!!!!!!!!!!2007-02-23
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART