From: mmmmmmmmmmmm mmmmmmmmmmmm (now_on_the_dark_side@hotmail.co.uk)
Date: Tue Feb 20 2007 - 06:40:56 ART
Hi, Tim
I too had this problem, I found a solution on an old post (can't remember
which forum) It turned out to be a bug in one of the 12.4 versions of code.
I'm now using flash:c2600-adventerprisek9-mz.124-3f.bin on a 2621xm and the
problem no longer appears.
HTH
C
>From: "Tim Curci" <timcurci@adelphia.net>
>Reply-To: "Tim Curci" <timcurci@adelphia.net>
>To: <ccielab@groupstudy.com>
>Subject: Losing manually configured neighbors and virtual links ospf upon
>reboot
>Date: Mon, 19 Feb 2007 21:48:18 -0500
>
>Why do I keep losing manually configured neighbors over NBMA frame
>multipoint
>network when I reboot the DR. I have set the priority at 200 on both hub
>subinterfaces. Inverse ARP disabled, etc.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART