RPF Failure for RP

From: digital-yemeni@hotmail.com
Date: Sat Feb 17 2007 - 02:30:29 ART

• Next message: digital-yemeni@hotmail.com: "Re: RPF Failure for RP (Follow-up)"
• Previous message: Wajid Khan: "Re: Startup for CCIE (R& S) LA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Experts!

If i have a multicast domain that runs Anycast MSDP with 2 RPs and 1 L3 Switch acting as a Mapping Agent in between. Since the IGP is prefering the RP address of the first RP, when the other RP sends the announcement to the Mapping Agent, the MA display an RPF failure! If i put static mroute to the 1st RP, then the second RP gets dropped (kina a loop situation where the MA can accept only one advertisment from one RP not both). Sine the mroute does not resolve the problem. What would be the optimal way to tackle this issue?

Thanks a lot for your help!

• Next message: digital-yemeni@hotmail.com: "Re: RPF Failure for RP (Follow-up)"
• Previous message: Wajid Khan: "Re: Startup for CCIE (R& S) LA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART