From: Dan C (cdan2154@gmail.com)
Date: Wed Feb 07 2007 - 09:36:22 ART
Hi Mohammad, before you go ahead and replace any memory pls check if you are
running the latest code or check if you have ip virtual-reassembly
configured on your interfaces. You can fix the issue either by upgrading to
the latest code or disable that command ( if you can ). Good luck, Dan
On 2/7/07, Scott Morris <swm@emanon.com> wrote:
>
> Hehehe... No worries. At some point, you'll do the same to others and
> help
> them out, and that's the way the CCIE Karma works. ;)
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPexpert VP - Curriculum Development
> IPexpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: Mohammad Saeed [mailto:mzsaeed@gmail.com]
> Sent: Tuesday, February 06, 2007 5:23 PM
> To: swm@emanon.com
> Cc: Cisco certification
> Subject: Re: Error in Log of 3825 Router
>
> Scott I really appreciate your response very much, and I feel I must send
> you some nice gift some time:):):) and not to mention other very good
> friends as well who are so good and kind to answer questions and some time
> very silly questions.......
>
> Regards,
>
> Mohammad Zahed Saeed
>
> On 2/6/07, Scott Morris <swm@emanon.com> wrote:
> > Check out:
> >
> > http://www.cisco.com/en/US/products/hw/cable/ps2217/products_field_not
> > ice091
> > 86a0080094c46.shtml
> >
> > Doesn't seem to apply per their list, but who knows.
> >
> > %SYS-2-CHUNKBADMAGIC : Bad magic number in chunk header, chunk [hex]
> > data [hex] chunkmagic [hex] chunk_freemagic [hex]
> >
> > Explanation A software error has occurred.
> >
> > Recommended Action Copy the error message exactly as it appears on the
> > console or in the system log, contact your Cisco technical support
> > representative, and provide the representative with the gathered
> > information.
> >
> > In general, call TAC. Memory likely at fault.
> >
> > Scott
> >
> > -----Original Message-----
> > From: Mohammad Saeed [mailto:mzsaeed@gmail.com]
> > Sent: Tuesday, February 06, 2007 3:40 PM
> > To: swm@emanon.com
> > Subject: Re: Error in Log of 3825 Router
> >
> > I am sorry, forgot to attach the screenshot...here it is:)
> >
> > Regards,
> >
> > Mohammad Zahed Saeed
> >
> > On 2/6/07, Scott Morris <swm@emanon.com> wrote:
> > > What error is it showing you?
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > > Of Mohammad Saeed
> > > Sent: Tuesday, February 06, 2007 3:10 PM
> > > To: Cisco certification
> > > Subject: Error in Log of 3825 Router
> > >
> > > Hello Every body,
> > >
> > > We have one 3825 router connected to the internet and its logging is
> > > showing this error message with Critical status. Apparentaly router
> > > is
> > fine and up.
> > > Does any one have idea what is this error about and how to fix it?
> > >
> > > Thanks,
> > >
> > > Mohammad Zahed Saeed
> > >
> > > ____________________________________________________________________
> > > __ _ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART