From: Scott Morris (swm@emanon.com)
Date: Tue Feb 06 2007 - 22:35:44 ART
Hehehe... No worries. At some point, you'll do the same to others and help
them out, and that's the way the CCIE Karma works. ;)
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: Mohammad Saeed [mailto:mzsaeed@gmail.com]
Sent: Tuesday, February 06, 2007 5:23 PM
To: swm@emanon.com
Cc: Cisco certification
Subject: Re: Error in Log of 3825 Router
Scott I really appreciate your response very much, and I feel I must send
you some nice gift some time:):):) and not to mention other very good
friends as well who are so good and kind to answer questions and some time
very silly questions.......
Regards,
Mohammad Zahed Saeed
On 2/6/07, Scott Morris <swm@emanon.com> wrote:
> Check out:
>
> http://www.cisco.com/en/US/products/hw/cable/ps2217/products_field_not
> ice091
> 86a0080094c46.shtml
>
> Doesn't seem to apply per their list, but who knows.
>
> %SYS-2-CHUNKBADMAGIC : Bad magic number in chunk header, chunk [hex]
> data [hex] chunkmagic [hex] chunk_freemagic [hex]
>
> Explanation A software error has occurred.
>
> Recommended Action Copy the error message exactly as it appears on the
> console or in the system log, contact your Cisco technical support
> representative, and provide the representative with the gathered
> information.
>
> In general, call TAC. Memory likely at fault.
>
> Scott
>
> -----Original Message-----
> From: Mohammad Saeed [mailto:mzsaeed@gmail.com]
> Sent: Tuesday, February 06, 2007 3:40 PM
> To: swm@emanon.com
> Subject: Re: Error in Log of 3825 Router
>
> I am sorry, forgot to attach the screenshot...here it is:)
>
> Regards,
>
> Mohammad Zahed Saeed
>
> On 2/6/07, Scott Morris <swm@emanon.com> wrote:
> > What error is it showing you?
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Mohammad Saeed
> > Sent: Tuesday, February 06, 2007 3:10 PM
> > To: Cisco certification
> > Subject: Error in Log of 3825 Router
> >
> > Hello Every body,
> >
> > We have one 3825 router connected to the internet and its logging is
> > showing this error message with Critical status. Apparentaly router
> > is
> fine and up.
> > Does any one have idea what is this error about and how to fix it?
> >
> > Thanks,
> >
> > Mohammad Zahed Saeed
> >
> > ____________________________________________________________________
> > __ _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART