From: Christopher M. Heffner (cheffner@certified-labs.com)
Date: Mon Feb 05 2007 - 19:31:02 ART
If anybody wants to purchase some 4210s running 5.x just send me an
email offline.
These are REAL Cisco 4210 sensors and not FrankenIDS boxes.
Regards,
Christopher M. Heffner, CCIE 8211, CCSI 98760
Strategic Network Solutions, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brad Ellis
Sent: Saturday, February 03, 2007 7:13 PM
To: Zahid Hassan
Cc: security@groupstudy.com; ccielab@groupstudy.com
Subject: Re: ASA 5510 License Requirement for Security Lab
You'll want either a 4215 or a 4235 with a 4FE card installed. The
4235s
are cheaper than the 4215s from what I've seen. Now, you can do quite a
bit
with a 4210 that will run 5.x IPS code. If you can afford it, go with
the
4235 w/ 4FE, if not, settle for a 4210. :)
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
mailto:brad@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Rental Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "Zahid Hassan" <zhassan@gmx.net>
To: "Brad Ellis" <brad@ccbootcamp.com>
Sent: Saturday, February 03, 2007 3:55 PM
Subject: RE: ASA 5510 License Requirement for Security Lab
Brad,
Many thanks, appreciate this very much.
Also what would be the smallest IPS 4200 series
that you would recommend for the revised security lab ?
Regards,
Zahid
-----Original Message-----
From: Brad Ellis [mailto:brad@ccbootcamp.com]
Sent: Saturday, February 03, 2007 11:20 PM
To: Zahid Hassan; Security GroupStudy; R&S CCIEGroupStudy
Subject: Re: ASA 5510 License Requirement for Security Lab
In order for failover to work, both ASA's need to have the same license.
And for the security lab exam, you will want both ASA's to have the
Security
Plus license. In addition, if either ASA has an SSM (either CSC or
AIP),
then the failover MUST have the same exact module.
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
mailto:brad@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Rental Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "Zahid Hassan" <zhassan@gmx.net>
To: "Security GroupStudy" <security@groupstudy.com>; "R&S
CCIEGroupStudy"
<ccielab@groupstudy.com>
Sent: Saturday, February 03, 2007 1:06 PM
Subject: ASA 5510 License Requirement for Security Lab
> Dear All,
>
>
> Can anyone please clarify if its really necessary
> to have two ASA 5510 with Security Plus license.
>
> Will failover configuration work if one is with
> Security Plus and the other with Base license ?
>
>
> Thanks in advance for any input on this.
>
>
> Regards,
>
>
> Zahid
> CCIE #14103 (R&S/SP)
>
>
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART