From: getmo1 (getmo1@126.com)
Date: Wed Jan 31 2007 - 02:15:30 ART
Mohamed,
It means you have not a invalid IOS in flash: or you did not set correct IOS
in boot string.
Regards,
Jerry
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: Wednesday, January 31, 2007 1:18 AM
To: ccielab@groupstudy.com
Subject: boot: cannot load "flash:"
Hello GS,
i put a new 32 flash and 96 DRAM into my 3640 router. when i power the
router it goes into rommon 1> below is the message i am getting at boot up:
===================================================================
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
PCMCIA Slot0: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
PCMCIA Slot1: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
loadprog: error - Invalid image for platform
e_machine = 43, cpu_type = 30
boot: cannot load "flash:"
==========================================================
Can anyone help here i am trying to load new IOS
Thanks,
Mohamed
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:58 ART