From: Andrew Larkins (andrew.larkins@BTGroup.co.za)
Date: Wed Jan 31 2007 - 03:43:29 ART
The new flash is not formatted and has no image on it...Use tftpdnld to
get an image on else boot from slot0: or slot1: and then format and
upload as normal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: 30 January 2007 19:18
To: ccielab@groupstudy.com
Subject: boot: cannot load "flash:"
Hello GS,
i put a new 32 flash and 96 DRAM into my 3640 router. when i power the
router it goes into rommon 1> below is the message i am getting at boot
up:
===================================================================
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory Main memory is
configured to 64 bit mode with parity disabled
PCMCIA Slot0: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory Main memory is
configured to 64 bit mode with parity disabled
PCMCIA Slot1: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory Main memory is
configured to 64 bit mode with parity disabled
loadprog: error - Invalid image for platform e_machine = 43, cpu_type
= 30
boot: cannot load "flash:"
==========================================================
Can anyone help here i am trying to load new IOS
Thanks,
Mohamed
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:58 ART