From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Jan 19 2007 - 02:00:15 ART
You should look into the "bgp-policy" interface level command. Your
example appears to be missing it.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi
rp_r/rte_bgh1.htm#wp1072605
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie anees
Sent: Thursday, January 18, 2007 8:28 PM
To: ccielab@groupstudy.com
Subject: QoS Policy propagation via BGP
Hi,
I am seeing in 12.4 config guide to configure QoS via BGP using the
command
router bgp XXXX
table-map <route-map>
route-map <route-map>
match
set ip precedence.
I don't understand how QoS marking will be applied on the packets.
Because it looks like this command applies to the routes in the routing
table.
Please explain me.
Thanks,
Anees.
---------------------------------
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:57 ART