RE: dynamips/dynagen

From: Tim (ccie2be@nyc.rr.com)
Date: Wed Jan 10 2007 - 21:29:44 ART

• Next message: Darby Weaver: "RE: Lab Study Partner"
• Previous message: Brian McGahan: "RE: Free CCIE Lab Strategy seminar tomorrow 12/10/06"
• Maybe in reply to: Scott Thornton: "dynamips/dynagen"
• Next in thread: Ben Holko: "RE: dynamips/dynagen"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

I'm preparing for the Security lab but I've been noticing these posts
regarding Dynamips.

As you probably know, if one is going to setup a practice lab for security,
you'll need a firewall, vpn concentrator, an ACS server, an IDS and some
other stuff. This is in addition to a bunch of routers and switches.

If Dynamips were to be used to set up a practice lab, is there a way to
connect these other devices to the PC running Dynamips such that one could
simulate a full network?

This would be truly fantastic if possible.

All thoughts and comments are welcomed.

TIA, Tim

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Henk
de Tombe
Sent: Tuesday, January 09, 2007 3:09 AM
To: Scott Thornton; Cisco certification
Subject: RE: dynamips/dynagen

Hi Scott,

Try the link below:

http://dyna-gen.sourceforge.net/tutorial.htm

This tutorial is very good!! Have fun with this great product.

Regards,

Henk

-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Scott
Thornton
Verzonden: dinsdag 9 januari 2007 5:18
Aan: Cisco certification
Onderwerp: dynamips/dynagen

Can anyone provide me with the steps necessary to setup dynamips? I'm
using
Windows XP.

I have downloaded dyagen and dynamips. Do you need anything else?
Cygwin?
I also downloaded a 7200 image to run. I'm just confused on how to set
everything up.

Thanks.

-- 
Scott C Thornton
Notice: This e-mail (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may
be
legally privileged.  If you are not the intended recipient, you are
hereby
notified that any retention, dissemination, distribution, or copying of
this
communication is strictly prohibited.  Please reply to the sender that
you
have received the message in error, then delete it.  Thank you.

• Next message: Darby Weaver: "RE: Lab Study Partner"
• Previous message: Brian McGahan: "RE: Free CCIE Lab Strategy seminar tomorrow 12/10/06"
• Maybe in reply to: Scott Thornton: "dynamips/dynagen"
• Next in thread: Ben Holko: "RE: dynamips/dynagen"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART