RE: dynamips/dynagen

From: Ben Holko (ben.holko@datacom.com.au)
Date: Wed Jan 10 2007 - 21:57:14 ART

Yes - you can bind interfaces on a dynamips router to physical NIC's in
the PC - aka, your PC becomes an physical IOS enabled device.

Read the readme and FAQ for more details.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tim
Sent: Thursday, 11 January 2007 11:30 AM
To: 'Henk de Tombe'; 'Scott Thornton'; 'Cisco certification';
security@groupstudy.com
Subject: RE: dynamips/dynagen

Hi Guys,

I'm preparing for the Security lab but I've been noticing these posts
regarding Dynamips.

As you probably know, if one is going to setup a practice lab for
security, you'll need a firewall, vpn concentrator, an ACS server, an
IDS and some other stuff. This is in addition to a bunch of routers and
switches.

If Dynamips were to be used to set up a practice lab, is there a way to
connect these other devices to the PC running Dynamips such that one
could simulate a full network?

This would be truly fantastic if possible.

All thoughts and comments are welcomed.

TIA, Tim

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Henk de Tombe
Sent: Tuesday, January 09, 2007 3:09 AM
To: Scott Thornton; Cisco certification
Subject: RE: dynamips/dynagen

Hi Scott,

Try the link below:

http://dyna-gen.sourceforge.net/tutorial.htm

This tutorial is very good!! Have fun with this great product.

Regards,

Henk

-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Scott
Thornton
Verzonden: dinsdag 9 januari 2007 5:18
Aan: Cisco certification
Onderwerp: dynamips/dynagen

Can anyone provide me with the steps necessary to setup dynamips? I'm
using Windows XP.

I have downloaded dyagen and dynamips. Do you need anything else?
Cygwin?
I also downloaded a 7200 image to run. I'm just confused on how to set
everything up.

Thanks. 

--
Scott C Thornton

Notice: This e-mail (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may
be legally privileged.  If you are not the intended recipient, you are
hereby notified that any retention, dissemination, distribution, or
copying of this communication is strictly prohibited.  Please reply to
the sender that you have received the message in error, then delete it.
Thank you.

This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART