From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Wed Jan 10 2007 - 12:16:13 ART
Go into config mode and issue the command 'no partition flash'
You may need to erase flash:2 first.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Muhammad Saleem
Sent: Wednesday, January 10, 2007 3:55 AM
To: ccielab@groupstudy.com; cisco@groupstudy.com
Subject: ned help CCIE Lab, upgrade 2500 IOS
Hi Guys
I am trying to upgrade the current IOS to ver 12.2 on a 2500 series router.
I
am taking following steps:
1) configure terminal
2) config-reg 0x2101
3) router# reload
4) Router(boot)#copy tftp flash
Partition Size Used Free Bank-Size State Copy
Mode
1 8192K 5181K 3010K 8192K Read/Write
Direct
2 8192K 5771K 2420K 8192K Read/Write
Direct
[Type ?<no> for partition directory; ? for full directory; q to abort]
Which partition? [default = 1]
System flash directory, partition 1:
File Length Name/status
1 5305376 c2500-d-l.112-8
[5305440 bytes used, 3083168 available, 8388608 total]
Address or name of remote host [255.255.255.255]? 192.168.1.100
Source file name? c2500-js-l.122-7.bin
Destination file name [c2500-js-l.122-7.bin]? c2500-js-l.122-7.bin
Accessing file 'c2500-js-l.122-7.bin' on 192.168.1.100...
Loading c2500-js-l.122-7.bin ...from 192.168.1.100 (via Ethernet0): !
[OK]
Erase flash device before writing? [confirm]y
Flash contains files. Are you sure you want to erase? [confirm]y
%Error: Image size exceeds flash size
How can I combine 8mb Flash 1 and 8mb Flash 2 into 16mb Flash? So the IOS
can
be upgraded
I will appreciate all replies
Muhammad Saleem
Networks Manager
University of Hail
Saudi Arabia
Mobile: 00966508205722
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART