From: Muhammad Saleem (msaleems@gmail.com)
Date: Wed Jan 10 2007 - 13:10:38 ART
Yes, that's it, #no partition flash 2 8 8, reload, it worked man, now I am
seeing
Router(boot)#sh flash
System flash directory:
No files in System flash
[0 bytes used, 16777216 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
Guys, how can I say thanks? This is the beginning of my CCIE home lab, now I
can kick the boat,
Thanks (*Cisco study groupstudy@btinternet.com)*
Thanks again
Muhammad Saleem
Networks Manager
University of Hail
Saudi Arabia
On 1/10/07, Cisco study <groupstudy@btinternet.com> wrote:
>
> Salaam alaykum!
>
> Hope you are well.
>
> If you have two 8 MB partitions, there may be a command in your 'sh run'
> that looks like this: partition flash 2 8 8
> You'll need to type no partition flash 2 8 8 in the global config.
> You may need to format one partition before you are able to do this.
>
> Let me know if the above words.
>
> Regards!
>
> Hi Guys
> I am trying to upgrade the current IOS to ver 12.2 on a 2500 series
> router. I
> am taking following steps:
> 1) configure terminal
> 2) config-reg 0x2101
> 3) router# reload
> 4) Router(boot)#copy tftp flash
> Partition Size Used Free Bank-Size State Copy
> Mode
> 1 8192K 5181K 3010K 8192K Read/Write
> Direct
> 2 8192K 5771K 2420K 8192K Read/Write
> Direct
> [Type ? for partition directory; ? for full directory; q to abort]
> Which partition? [default = 1]
> System flash directory, partition 1:
> File Length Name/status
> 1 5305376 c2500-d-l.112-8
> [5305440 bytes used, 3083168 available, 8388608 total]
> Address or name of remote host [255.255.255.255]? 192.168.1.100
> Source file name? c2500-js-l.122-7.bin
> Destination file name [c2500-js-l.122-7.bin]? c2500-js-l.122-7.bin
> Accessing file 'c2500-js-l.122-7.bin' on 192.168.1.100...
> Loading c2500-js-l.122-7.bin ...from 192.168.1.100 (via Ethernet0): !
> [OK]
> Erase flash device before writing? [confirm]y
> Flash contains files. Are you sure you want to erase? [confirm]y
> %Error: Image size exceeds flash size
>
> How can I combine 8mb Flash 1 and 8mb Flash 2 into 16mb Flash? So the IOS
> can
> be upgraded
>
> I will appreciate all replies
>
> Muhammad Saleem
> Networks Manager
> University of Hail
> Saudi Arabia
> Mobile: 00966508205722
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART