From: Noel Debouver III (noeldebouveriii@yahoo.com)
Date: Sun Jan 07 2007 - 12:39:38 ART
I don't watch sports nor do I gamble.
"Faryar Zabihi (fzabihi)" <fzabihi@cisco.com> wrote:
No doubt...u have some balls. I mean picking the jets to beat the patriots
:)
-----Original Message-----
From: Noel Debouver III [mailto:noeldebouveriii@yahoo.com]
Sent: Sunday, January 07, 2007 09:58 AM Eastern Standard Time
To: 'groupstudy''
Subject: Lab 1 Switching Problems
1.1 Find three faults, 2 points each.
==========================
1. Wrong IP Address
2. Wrong Subnet Mask
3. Mac-Filter Applied to Interface Connecting to BB3
1.2 Frame Relay (2 Points)
=====================
1. Configure Frame Relay on designated Routers.
2. Don't use dynamic mapping.
3. Interfaces must be pingable.
1.3 VTP Configuration (1 Point)
=======================
1. Configure VTP Domain named CCIE.
2. Configure mode as appropriate.
3. All switches must use the same mode.
4. All switches use a password of cisco.
5. All switches must use the newest version available.
1.4 Etherchannel (2 Points)
=====================
1. Configure an etherchannel between two switches as appropriate.
2. Don't use pagp or lacp
3. Use /30 Addressing
4. Configure ports 11-14 and 15-18 on each switch to each appear as one
link.
5. Even vlans use the first etherchannel and odds use the second
etherchannel
1.5 VLAN Configuration (1 Point)
==========================
1. Confgure vlans as required to complete this lab.
2. Name all vlans.
3. All switches must be the same.
1.6 Layer 3 Configuration (1 Point)
==========================
1. Configure Sw1 and Sw2 to intervlan routing with R3 having the layer 3
address
2. Configure vlan_1000 and vlan 2000.
3. Use the highest available ip address for the gateway.
4. Use lowest available ip address for the client.
1.7 More Etherchannel (2 Points)
=========================
1. Configure etherchannel between switch 1 and 3.
2. Configure etherchannel between switch 2 and 3.
3. Use pagp for one etherchannel as appropriate.
4. Use lacp for one etherchannel as appropriate.
1.8 Switch Misc. Features (4 Points)
===========================
1. Limit inbound broadcast traffic to 40% physical speed of the f0/10 on
sw2.
2. Block incoming unknown unicast and multicast traffic on f0/10 on sw3.
3. All etherchannel neighbors must hoold cdp information for 180 minutes.
1.9 Sniffer (2 Points)
==================
1. Port f0/20 on sw4 has an IDS attached. Configure the port to work with
the IDS.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART