From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Wed Jan 03 2007 - 17:28:43 ART
have a look at this:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea7/scg/sw8021x.htm
On 1/3/07, Mohammad Saeed <mzsaeed@gmail.com> wrote:
>
> Hi,
>
> Please have a look on this configuration, and can you see that all the
> users trying to pass through fa0/9 and fa0/10 will be sent for
> authentication ro Radius Server for authentication and will be allowed
> to pass through if authenticated by the Radius server. I know it can
> be configured on 3550, can I configure the same on 2950?
>
> conf t
> aaa new-model
> aaa authentication login default none
> aaa authentication dot1x default group radius
> radius-server host 204.12.1.100
> radius-server key CISCO
> ip radius source-interface lo0
> dot1x system-auth-control
> int fa0/9
> switchport mode access
> dot1x port-control auto
> int fa0/10
> switchport mode access
> dot1x port-control auto
> end
> wr
>
> I appreciate any help regarding this problem...
>
> Regards,
>
> Mohammad Zahed Saeed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART