From: Mohammad Saeed (mzsaeed@gmail.com)
Date: Wed Jan 03 2007 - 17:13:50 ART
Hi,
Please have a look on this configuration, and can you see that all the
users trying to pass through fa0/9 and fa0/10 will be sent for
authentication ro Radius Server for authentication and will be allowed
to pass through if authenticated by the Radius server. I know it can
be configured on 3550, can I configure the same on 2950?
conf t
aaa new-model
aaa authentication login default none
aaa authentication dot1x default group radius
radius-server host 204.12.1.100
radius-server key CISCO
ip radius source-interface lo0
dot1x system-auth-control
int fa0/9
switchport mode access
dot1x port-control auto
int fa0/10
switchport mode access
dot1x port-control auto
end
wr
I appreciate any help regarding this problem...
Regards,
Mohammad Zahed Saeed
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART