From: Scott Morris (swm@emanon.com)
Date: Tue Jan 02 2007 - 12:04:02 ART
In a nutshell, cir and mincir values are per second (hence bps).
Bc and be values are per Tc.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gavin Lawson
Sent: Tuesday, January 02, 2007 6:40 AM
To: ccielab@groupstudy.com
Subject: FRTS - Yes this toppic again
I still haven't got it nailed.
With cir is this value per second or for Tc?
The Same with mincir?
If the question says - the minimum transmission rate should be 8K bits/sec
and using tc as 1/8 of a second then is mincir 8000 or 1000?
The below reference says to use 8000, but other documents tell me to use
1000?
http://www.cisco.com/en/US/customer/tech/tk713/tk237/technologies_config
uration_example09186a00800942f8.shtml
GL
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART