From: ccie anees (ccieanees@yahoo.com)
Date: Sat Dec 30 2006 - 21:13:02 ART
For example if you have two switches A and B.
Both are in vtp transparent. It will have vtp revision 0.
Now you planned to convert A as VTP server and B as VTP client.
SO you are creating vlans in A before converting to VTP server.
Now ehn you convert A as VTP server and B as VTP client, you can see show vtp status on both switches, you will have vtp revision 0.
And you will not get your vlans from A to B.
I think this is the problem you are seeing.
what you can do is after you convert into server and client, just create any new vlan in A (VTP server) , exit and delete that vlan. It will increase the revision number to 2 and you can see the VLANs propagated to switch B.
Please check and let me know.
Thanks,
Anees.
johngibson1541@yahoo.com wrote:
every time I start fresh (no vlan.dat) on both switches, create/delete vlans works perfectly.
But if I rebuild network, client doesn't follow the sever.
Is it possible if the client's config version number is larger than server's config version number, client simply ignores updates ?
John
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART