From: Hough, Earl (Earl.Hough@sarcom.com)
Date: Sat Dec 30 2006 - 10:30:25 ART
Everyone,
I posted this very question to the Certifications Online Support tool
and was told that the PIX and the ASA devices would be using 7.2.x code.
Earl Hough
CCIE #16508
________________________________
From: nobody@groupstudy.com on behalf of V Shekhar
Sent: Sat 12/30/2006 12:10 AM
To: Farrukh Haroon
Cc: Groupstudy; Cisco certification
Subject: Re: ASA & L2TP/PPT
yes, you are correct in saying that 7.2 supports L2TP with IPSEC, but i
it
likely that the security LAB will be using 7.2 code?
I am assuming that CCIE
folks do not prefer to use the latest code immediately in LAB. They
*might*
use 7.0 or 7.1.
Any Ideas?
Thanx,
-sHekHar.
CCSP/CISSP/RHCE.
-----
Original Message ----
From: Farrukh Haroon <farrukhharoon@gmail.com>
To: V
Shekhar <vshekhar25@yahoo.com>
Cc: Groupstudy <security@groupstudy.com>; Cisco
certification <ccielab@groupstudy.com>
Sent: Saturday, December 30, 2006
10:25:14 AM
Subject: Re: ASA & L2TP/PPT
Shekhar, L2TP (over IPSEC) support
was put back into PIX 7.2.X release (it was not there in 7.0 and 7.1
releases
I think) , this is a sample configuration from CCO:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configura
tion_
example09186a00807213a7.shtml
On 12/30/06, V Shekhar <
vshekhar25@yahoo.com>
wrote:Just wanted make sure that ASA does not support L2TP & PPTP.
Does this
mean L2TP & PPTP is only tested against 3K?
Any thoughts?
Thanx,
-sHekHar.
CCSP/CISSP/RHCE.
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART