From: Hough, Earl (Earl.Hough@sarcom.com)
Date: Sun Dec 31 2006 - 10:16:45 ART
Farrukh,
This is the email I received back from Cisco when I posed the
question
to them regarding what version of OS would be used in the lab.
>Hello Earl,
>It will be 7.2x
>regards,
>Tong
Ma
>CCIE Program
Earl Hough
CCIE #16508
________________________________
From: Kal Han
[mailto:calikali2006@gmail.com]
Sent: Saturday, December 30, 2006 9:36 PM
To: Farrukh Haroon
Cc: Hough, Earl; V Shekhar; Groupstudy; Cisco
certification
Subject: Re: ASA & L2TP/PPT
They are going to use 7.2
code.
Its guaranteed.
On 12/30/06, Farrukh Haroon
<farrukhharoon@gmail.com> wrote:
Hello Earl,
thanks for that very
useful info, but can you please point to the exact
location on the Cert
Online Support Tool page that pertains to this...
Thanks
On 12/30/06,
Hough, Earl <Earl.Hough@sarcom.com> wrote:
>
> Everyone,
>
> I posted this
very question to the Certifications Online Support tool
> and was told that
the PIX and the ASA devices would be using 7.2.x
code.
>
> Earl Hough
>
CCIE #16508
>
> ________________________________
>
> From:
nobody@groupstudy.com on behalf of V Shekhar
> Sent: Sat 12/30/2006 12:10 AM
> To: Farrukh Haroon
> Cc: Groupstudy; Cisco certification
> Subject: Re:
ASA & L2TP/PPT
>
>
>
> yes, you are correct in saying that 7.2 supports
L2TP with IPSEC, but
i
> it
> likely that the security LAB will be using
7.2 code?
> I am assuming that CCIE
> folks do not prefer to use the latest
code immediately in LAB. They
> *might*
> use 7.0 or 7.1.
> Any Ideas?
>
> Thanx,
> -sHekHar.
> CCSP/CISSP/RHCE.
>
> -----
> Original Message ----
> From: Farrukh Haroon < farrukhharoon@gmail.com
<mailto:farrukhharoon@gmail.com> >
> To: V
> Shekhar <vshekhar25@yahoo.com>
> Cc: Groupstudy <security@groupstudy.com >; Cisco
> certification
<ccielab@groupstudy.com>
> Sent: Saturday, December 30, 2006
> 10:25:14 AM
> Subject: Re: ASA & L2TP/PPT
>
> Shekhar, L2TP (over IPSEC) support
> was
put back into PIX 7.2.X release (it was not there in 7.0 and 7.1
> releases
> I think) , this is a sample configuration from CCO:
>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configura
>
tion_
> example09186a00807213a7.shtml
>
>
> On 12/30/06, V Shekhar <
>
vshekhar25@yahoo.com>
> wrote:Just wanted make sure that ASA does not support
L2TP & PPTP.
>
> Does this
> mean L2TP & PPTP is only tested against 3K?
>
> Any thoughts?
>
> Thanx,
> -sHekHar.
> CCSP/CISSP/RHCE.
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART