From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Fri Dec 29 2006 - 20:22:03 ART
It would set the aging time for all secure addresses on the port.
On 12/29/06, JB <jellyboy@gmail.com> wrote:
>
> Hi All, I'm a bit stuck on this one- what the switchport port-security
> aging time command does exactly? I am thinking along the lines of it
> being used:
>
>
> interface FastEthernet0/7
> switchport access vlan 5
> switchport mode access
> switchport port-security
> switchport port-security maximum 2
> switchport port-security aging time 1
>
> This would allow 2 macs to be allowed on port 7. If one mac was
> deleted, then then another could be learned after an absolute time of
> 1 minute. Am I correct or got the functionality way off the mark?
>
> TIA,
>
> JB
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART