From: jay buss (ccie_sp@hotmail.com)
Date: Fri Dec 22 2006 - 15:29:27 ART
Hi guys...
I'm having troubles with ATM cell-mode and I think I'm missing some tiny
part.
What I'm trying to accomplisch is the following:
ROUTER2
interface ATM1/0.1 tag-switching ip address 140.100.2.1 255.255.255.0 mpls
label protocol ldp tag-switching atm vp-tunnel 3 vci-range 33-65535
tag-switching ipend
ROUTER3
interface ATM1/0.1 tag-switching ip address 140.100.2.2 255.255.255.0 mpls
label protocol ldp tag-switching atm vp-tunnel 3 vci-range 33-65535
tag-switching ipend
Router1 is connected to router2 and router2 is connected to router3.. assume
there are no routing issues.
Why can't router1 ping router3.. when I disable "mpls label protocol ldp" on
the interfaces I can ping locally from Router2 to Router3, but still not from
Router1. What part am I missing... I suspect a MPLS issue or Atm Cell mode
config problem...
If I use "classical ATM" between the interfaces on Router2 and Router3
everything is working correctly and I can ping Router3.
Thanks in advance!
Regards and happy holidays!!!!!!!!
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART