From: Scott Morris (swm@emanon.com)
Date: Sat Dec 16 2006 - 08:25:50 ART
Yeah, I think later it was subtlely hinted at that it was "known" you had to
do that in order to set things up (e.g. cheating). An amusing, albeit
frustrating exercise. But on the other hand, you know how it works now! :)
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Keith Bizzell
Sent: Saturday, December 16, 2006 6:12 AM
To: Kemal YILDIRIM
Cc: Cisco certification
Subject: Re: IE Core 3 section 4.5 OSPF virtual link
Looking into Scott's reply on the second link, that's exactly what I'm
seeing. Now I don't feel so dumb. :)
On 12/16/06, Keith Bizzell <mkbcoolman@gmail.com> wrote:
>
> Thanks Kemal!
>
> On 12/16/06, Kemal YILDIRIM <kemalhy@gmail.com> wrote:
> >
> > Hello Keith,
> > This has been discussed some time ago, There were different
> > apporaches by different gurus.
> > Have a look at the below links
> >
> > http://www.groupstudy.com/archives/ccielab/200604/msg00083.html
> >
> > http://www.groupstudy.com/archives/ccielab/200608/msg01252.html
> >
> >
> > HTH,
> > Kemal
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On
> > Behalf Of Keith Bizzell
> > Sent: 16 Aral}k 2006 Cumartesi 11:56
> > To: Cisco certification
> > Subject: IE Core 3 section 4.5 OSPF virtual link
> >
> > I'm seeing something strange with the virtual link. I can get it to
> > work, I just cant explain why. The is no Area 0 defined in the
> > topology, and the lab requires you to build a virtual-link between
> > R3 and R1. I build this out on using the loopback addresses, but it
> > will not work until I assign the loopback of R3 to area 0. After
> > the virtual link is establised, I can remove the loopback from Area
> > 0, and everything still works fine. Why? I'm uncomfortable with
> > this solution on a lab, since I don't think this configuration would
> > work on a reboot.
> >
> > Thanks,
> > Keith
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART