From: Mohammad Saeed (mzsaeed@gmail.com)
Date: Fri Dec 15 2006 - 02:14:10 ART
Hello Every body,
How one can configure two different keys on one interface of Hub
(Frame Relay Interface) connecting to two different interfaces. I have
tried this config but Hub Router establish adjacency with one router
(with lower key number) only!
R3 (Hub)
key chain EIGRP135
key 1
key-string CISCO13
key 5
key-string CISCO35
R1 (one spoke)
key chain EIGRP13
key 1
key-string CISCO13
R5 (second Spoke)
key chain EIGRP35
key 5
key-string CISCO35
R3 establish EIGRP adjacency with only R1. R3, R1 and R5 have
frame-relay configured using physical interfaces only.
Any help is appreciated.
Regards,
Mohammad Zahid Saeed
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART